APS500: X-ERT Spacer Fix Anchor (Kit)
The APS500 X-ERT Spacer Fix Anchor (Kit) is a permanent anchor, designed for use as a single person anchor. It is suitable for fixing through double brick walls or concrete filed masonry walls and through sandwich panel roofing. The Spacer Fix anchors unique design gives unlimited flexibility for the thickness of the material being bolted through.
Correct installation and certification of the X-ERT APS500 in concrete masonry walls is conditional on the masonry blocks being concrete filed.
The X-ERT unique design incorporates the ability to dramatically reduce the loads applied to the structure in the case of a fall by an inbuilt energy absorption function. This shock absorbing action is designed to continually distort, making it a genuine energy absorbing anchor.
This type of anchor can also be installed using rated eyelets instead of anchor point eyebolt when installed on a wall.
• Safe access to roof areas for roof or gutter maintenance
• Safe access while installing or maintaining equipment near a fall zone
• The X-ERT APS500 is designed to bolt through the base material where a ‘glued-in’ installation can not be achieved
|Material||• Eyebolt- G316 Stainless steel|
|• Spacer, Flanges and Fixings G316 Stainless steel|
|Dimensions||• Eyebolt: Overall- M14x245mm / Eye Diameter- 40mm|
|• Flashing- O-Ring and Rubber seal under Top flange|
|Weight||0.74kg (excludes fiings)|
|Working Load Limit||One person-15kN|
|• Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation|
|• The X-ERT APS500 must be used in conjunction with an approved harness and ropeline/lanyard system incorporating an energy absorber where required|
|Fixing Details||The X-ERT APS500 is fixed through the roof sheet or masonry structure through a 27mm hole in the roof or wall structure with flanges either side. The eyebolt is lined up in the direction of fall and the lock nut is tightened|
|Compliance||The X-ERT APS500 is manufactured in accordance with Australian Standards AS/NZS1891.4 and relevant OHS Codes of Practice/Guidelines|
|Testing||Testing based on requirements of Australian Standards AS/NZS 1891.4|
|• Dynamic Load Test- 1 person- 15kN|
|• Load Applied to Structure- 6.3kN|
|Life of Product||According to Australian Standards AS/NZS1891.4, the life of any height safety product is 10 years|
|Warranty||5 year from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations|
|Inspection and Maintenance||Inspection and Certification of product is required every 12 months by a competent person according to Australian Standards AS/NZS 1891.4|
Default delivery content here.