APS100: X-ERT Purlin Fix Energy Absorbing Anchor (Kit)
The APS100 X-ERT Purlin Fix Anchor (Kit) is a permanent anchor rated at 22kN, designed for use either as a single person or 2 person anchor. It is used on metal roofing/steel purlin structure when there is access to the underside of the purlin with minimal penetration to the roof.
The X-ERT unique design incorporates the ability to dramatically reduce the loads applied to the structure in the case of a fall by an inbuilt energy absorption function. This shock absorbing action is designed to continually distort, making it a genuine 2 man system.
The location of the anchor point(s) and the installation must be carried out by a competent person in accordance with the manufacturer’s recommendations.
Applications:
• Safe access to roof areas for roof or gutter maintenance
• Safe access while installing or maintaining equipment near a fall zone
Material | • Block- Stainless steel |
• Eyebolt- G316 Stainless steel | |
• Dektite seal- EPDM | |
Dimensions | Eyebolt: Overall- M14x245mm / Eye Diameter- 40mm |
Weight | 0.74kg (excludes fixings) |
Working Load Limit | • One person-15kN / Two people- 22kN |
• Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation | |
• The X-ERT APS100 must be used in conjunction with an approved harness and ropeline/lanyard system incorporating an energy absorber where required | |
Fixing Details | The X-ERT APS100 is fixed through the roof sheet through a 15-16mm hole in the purlin into a block beneath the top flange of the purlin. The eyebolt is lined up in the direction of fall and the lock nut is tightened. |
Compliance | The X-ERT APS100 is manufactured in accordance with Australian Standards AS/NZS1891.4 and relevant OHS Codes of Practice/Guidelines |
Testing | Testing based on requirements of Australian Standards AS/NZS 1891.4 |
• Dynamic Load Test- 2 person- 22kN | |
• Load Applied to Structure- 6.3kN | |
Life of Product | According to Australian Standards AS/NZS1891.4, the life of any height safety product is 10 years |
Warranty | 5 year from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations |
Inspection and Maintenance | Inspection and Certification of product is required every 12 months by a competent person according to Australian Standards AS/NZS 1891.4 |
Default delivery content here.
You must be logged in to post a review.
Reviews
There are no reviews yet.