FAQ
Safemaster can perform an on-site review to determine if your current equipment is in compliance with Australian safety standards. Our review will be supported by a written report with recommendations for any modifications. Contact us for details.
By either preventing you from falling (in restraint mode) or keeping the forces after a fall to less than 6kN (600kg).
It is recommended that fall protection equipment be worn above any height where a fall can result in injury. State regulatory requirements differ from 1.8m to 2.4m and should be consulted. Site or company requirements may also apply.
Occupational Safety and Health Act 1984, Section 23, 3(a) states: A person that designs or constructs any building or structure including a temporary structure, for use at a workplace shall, so far as is practicable ensure that the design and construction of the building or structure is such that:
A person who properly constructs, maintains, repairs or services the building or structure is not in doing so, exposed to hazards.
Occupational Safety and Health Act 1984, Section 23, 3(a) states: A person that designs or constructs any building or structure including a temporary structure, for use at a workplace shall, so far as is practicable ensure that the design and construction of the building or structure is such that:
A person who properly constructs, maintains, repairs or services the building or structure is not in doing so, exposed to hazards.
Six months for harnesses & lanyards. Twelve months for inertia reels, static line systems and anchor points in accordance with AS/NZS 1891.4. or as per the manufacturers requirements. For equipment used in harsh environments, a more frequent inspection policy is recommended.
Ten years from date of manufacture, providing that all harness components remain in a serviceable condition.
15kN (1500kg) for one person, for two persons an anchor point must be rated to a minimum of 21kN (2100kg).
Regulation 3.51 of the Occupational Safety and Health Regulations 1996 requires that a competent person inspect fall injury prevention systems. The regulation details the circumstances under which inspections should be carried out.
Safemaster is dedicated to providing only the best material and workmanship to all of our valued customers. All of our technicians are vetted thoroughly and have years of experience behind them. And while there are many equipment to choose from, we can recommend what we believe to be the best for your height safety solutions.
YES! Safemaster offer warranties for all our products. However the years of warranty is depends on the product. For an example, Safemaster offer up to 5 years of warranty on our modular ladder system and cover not only materials but workmanship as well. We always ensure to give you added security and peace of mind with your investment.